Toshiba Satellite Pro M10 Series - Display Mask; Removing the Display Mask

4 Replacement Procedures 4.22 Display Mask
4-64 Satellite Pro M10 Series Maintenance Manual (960-431)
4 s
4.22 Display Mask
Removing the Display Mask
To remove the display mask, follow the steps below and refer to Figures 4-44 and 4-45.
1. Remove two mask seals at the bottom corners of the display assembly.
2. Remove two M2.5×6 black flat-head screws securing the display mask.
NOTE: Support the display with your hand when you remove the screws.
M2.5×6 black flat-head screws
Mask seals
Figure 4-44 Removing the screws on the display mask