Toshiba Satellite Pro M10 Series - Page 249

4.9 Speakers 4 Replacement Procedures
Satellite Pro M10 Series Maintenance Manual (960-431) 4-37
3. Remove one M2.5×4 black flat-head screw securing each speaker.
4. Disconnect two speaker cables from PJ5004 and PJ5005 on the system board.
5. Free two speaker cables from their hooks.
6. Remove one M2.5×4 black flat-head screw from each of the speaker.
7. Remove the speakers.
PJ5004
PJ5005
Left Speaker
Right speaker
cable (red)
Left speaker
cable (blue)
Right Speaker
M2.5×4 black flat-head screws
Figure 4-24 Removing the speakers