4.33 TFT FL (Model 15.0 SXGA+ SHARP LQ150F1LH43) 4 Replacement Procedures
Satellite Pro M10 Series Maintenance Manual (960-431) 4-147
7. Seat the LCD panel on the backlight unit assembled by the steps above. Make sure
there are no dust between the LCD panel and the backlight. If you find any foreign
matter, remove it.
8. Make sure the LCD panel fits into the panel guide ribs.
Guide rib
Make sure the LCD panel fits
into the panel guide ribs.
LCD panel
Backlight unit
Figure 4-119 Installing the LCD panel
To Next Page
Loading...
