4.34 TFT FL (Model 15.0 UXGA SHARP LQ150U1LW13) 4 Replacement Procedures
Satellite Pro M10 Series Maintenance Manual (960-431) 4-155
3. Remove five screws from the side of the LCD module.
Loosen the screws
with 1.0 kgf•com of torque.
Screw
Screw
Screw
Screw
Screw
Figure 4-128 Removing the screws
4. Turn the LCD module right side up.
5. Remove the top frame. When you remove it, wear gloves or finger guards to avoid
staining or damaging the LCD panel.
qSide view r
Top frame
Release the U-shaped side of
the top frame.
Release the latch securing the top frame
with the P-chassis
Release four latches securitng
the top frame with the lamp cover
Figure 4-129 Removing the top frame
To Next Page
Loading...
