4.34 TFT FL (Model 15.0 UXGA SHARP LQ150U1LW13) 4 Replacement Procedures
Satellite Pro M10 Series Maintenance Manual (960-431) 4-157
10. Turn the LCD module right side up.
11. Remove the LCD panel from the backlight unit. When you remove the LCD panel,
wear finger covers or gloves to avoid staining or damaging the LCD panel and the
backlight unit.
LCD panel
Backlight unit
Figure 4-132 Removing the LCD panel
12. Turn the backlight unit upside down taking care not to damage or stain the sheets.
13. Remove two screws securing the lamp cover to remove it.
Screw
Screw
Backlight unit
Loosen the screws with 1.0kgf
¥
cm of torque.
Figure 4-133 Removing the lamp cover
To Next Page
Loading...
