Toshiba Satellite Pro M10 Series - Page 50

2 Troubleshooting Procedures 2.2 Troubleshooting Flowchart
2-4 Satellite Pro M10 Series Maintenance Manual (960-431)
No
No
No
No
Ye s
Ye s
No
No
Perform the Power Supply
Troubleshooting Procedures
in section 2.3.
Perform the Power Supply
Troubleshooting Procedures
in section 2.3.
Perform the System Board
Troubleshooting
Procedures in section 2.4.
Perform the Power Supply
Troubleshooting Procedures
in section 2.3.
Perform the Display
Troubleshooting Procedures
in section 2.8.
Perform the Hard Disk Drive
Troubleshooting Procedures
in section 2.6.
Does the DC IN LED glow?
Does the Battery LED glow?
Does the DC IN LED flash?
1
Is an error message displayed?
Is the
"
TOSHIBA " logo
message displayed?
Is Toshiba Windows XP
being loaded?
Turn the Power Switch on.
If the "Password=" message displays,
type the password, then press Enter.
START
Connect the AC adaptor
to the DC IN socket.
Ye s
Ye s
Ye s
Figure 2-1 Troubleshooting flowchart (1/2)