Toshiba Satellite Pro M10 Series - Page 60

2 Troubleshooting Procedures 2.3 Power Supply Troubleshooting
2-14 Satellite Pro M10 Series Maintenance Manual (960-431)
Check 2 In the case of error code 10h or 12h:
 Make sure the AC adaptor cord and AC power cord are firmly plugged into the DC IN 15
V socket and wall outlet. If the cables are connected correctly, go to the following step:
 Connect a new AC adaptor and/or AC power cord, if necessary. If the error still exists,
go to Procedure 5.
Check 3 In the case of error code 2Xh or 3Xh:
 Make sure the battery pack is correctly installed in the computer. If the battery pack is
correctly installed, go to the following step:
 Replace the battery pack with a new one. If the error still exists, go to Procedure 5.
Check 4 Any other error is occurred, go to Procedure 5.