TP-Link TL-SG5412F User Manual

The following entries are displayed on this screen:
 Create Notification
IP Address: Enter the IP Address of the management Host.
UDP Port: Enter the number of the UDP port used to send notifications. The
UDP port functions with the IP address for the notification sending.
The default is 162.
User: Enter the User name of the management station.
Security Model: Select the Security Model of the management station.
Security Level: Select the Security Level for the SNMP v3 User.
 noAuthNoPriv: No authentication and no privacy security
level are used.
 authNoPriv: Only the authentication security level is used.
 authPriv: Both the authentication and the privacy security
levels are used.
Type: Select the type for the notifications.
 Trap: Indicates traps are sent.
 Inform: Indicates informs are sent. The Inform type has a
higher security than the Trap type.
Retry: Specify the amount of times the switch resends an inform request.
The switch will resend the inform request if it doesn’t get the
response from the management station during the Timeout
interval, and it will terminate resending the inform request if the
resending times reach the specified Retry times.
Timeout: Specify the maximum time for the switch to wait for the response
from the management station before resending a request.
 Notification Table
Select: Select the desired entry to delete the corresponding management
station.
IP Address: Displays the IP Address of the management host.
UDP Port: Displays the UDP port used to send notifications.
User: Displays the User name of the management station.
Security Model: Displays the Security Model of the management station.
Security Level: Displays the Security Level for the SNMP v3 User.
Type: Displays the type of the notifications.
Timeout: Displays the maximum time for the switch to wait for the response
from the management station before resending a request.
Retry: Displays the amount of times the switch resends an inform
request.
182

TP-Link TL-SG5412F Specifications

General

MAC address table	8000 entries
Jumbo frames support	Yes
Maximum data transfer rate	1 Gbit/s
Supported data transfer rates	10, 100, 1000Mbps
Fan	0
Wi-Fi	No
Diagnostics	VCT
Management platform	SNMP, RMON, WEB/CLI/Telnet
Authentication method	802.1X, Radius
Packet transfer speed	17.99Mpps
Connectivity technology	Wired
Networking standards	IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Copper ethernet cabling technology	1000BASE-T, 100BASE-TX, 10BASE-T
DHCP features	DHCP client
Security algorithms	SSH, SSL/TLS
Switch type	Managed
Switch layer	L2
Console port	RJ-45
Fiber optic connector	SFP
SFP/SFP+ slots quantity	12
Basic switching RJ-45 Ethernet ports quantity	4
Fiber ethernet cabling technology	100BASE-FX
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Stackable	-
Form factor	1U
Certification	CE, FCC
Product color	Black
Compatible operating systems	Windows 98SE, NT, 2000, XP, Vista, Windows 7\\r MAC OS\\r NetWare\\r UNIX\\r Linux
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	260 mm
Width	440 mm
Height	44 mm