Figure 4-5 System Time
The following entries are displayed on this screen:
Time Info
Current System
Date:
Displays the current date and time of the switch.
Current Time
Source:
Displays the current time source of the switch.
Time Config
Manual: When this option is selected, you can set the date and time
manually.
Get GMT: When this option is selected, you can configure the time zone and
the IP Address for the NTP Server. The switch will get GMT
automatically if it has connected to an NTP Server.
Time Zone: Select your local time.
Primary/Secondary NTP Server: Enter the IP Address for the
NTP Server.
Synchronize with
PC’S Clock:
When this option is selected, the administrator PC’s clock is
utilized.
DST Config
DST Status: Enable or Disable DST.
15