INTRODUCTIONS
Features
a. Special function key(SPEC):
Programmable function key for forward/reverse running, jog speed,
selection of primary/secondary frequency command…etc.
b. Allow RS-485 communication interface control (Modbus RTU
communication protocol).
c. 6 sets of fault records:
Record 4 types of information under fault condition, respectively. (fault
code, output current, DC bus voltage, output frequency)
d. Running hours and supply power time of drive can be saved and
displayed.
e. Group design for the functions ease the function setting and
management.
f. Sequential operation control and PID control function.
g. Provide 8 sets of monitor displays(three of displays can be defined as
another extra displays).
h. Provide PTC sensor setting functions for preventing the motor from
overheating.
i. Energy-saving selection for light-duty load.
j. Auto-torque boost function.
k. Provide 8 preset speeds control.
l. The analog input signal of filter can be adjusted.
m. The response time of digital input signal is adjustable(adjustable dead
band detection).
n. Independent adjustment selection of V, F for analog input signal.
o. Two sets of analog input signals can do addition, subtraction and gain
control.
p. The switching frequency can be adjust between 800Hz ~ 16kHz.
5
To Next Page
Loading...