→
Results of actions are indicated by this smaller arrow.
Naming Conventions
Throughout the documentation, we will refer to the TRAKTOR KONTROL D2 hardware control-
ler either as the controller or simply D2.
The TRAKTOR 2 software and TRAKTOR SCRATCH will be referred to as TRAKTOR.
Button Combinations and Shortcuts on Your Controller
Most instructions will use the “+” sign to indicate buttons (or buttons and pads) that must be
pressed simultaneously, starting with the button indicated first. E.g., an instruction such as:
“Press SHIFT + PLAY”
means:
1. Press and hold SHIFT.
2. While holding SHIFT, press PLAY and release it.
3. Release SHIFT.
FX Knobs and Buttons
Above each of the Displays, there's a row of FX knobs and FX buttons which aren't labeled.
Similarly, the knobs below the display are unlabeled, the buttons are all labeled ON. To differ-
entiate them, we'll refer to them as FX knobs 1-4 and FX buttons 1-4 for the elements above the
display and Performance knobs 1-4 and Performance buttons 1-4 beneath the display.
Welcome to the World of TRAKTOR KONTROL D2!
Manual Conventions
TRAKTOR KONTROL D2 - Manual - 12
To Next Page
