(7) The absolute position on TRAKTOR's timeline measured in Bars.Beats.Phrases.
4.2.7.6 View Button
The View button is located in the top right corner of the display area.
View Button
It switches between view types:
• Single View: Only the focused Deck is displayed.
• Split View: Both Decks are displayed; the focused Deck is visualized by a big waveform
and detailed information, while the unfocused Deck is reduced to a small waveform,
showing markers and a playhead.
Whenever you open a pop-up from a Deck view (e.g. FX Selection Menu, Browser, BPM, or
KEY), the View button starts flashing. Press the View button to close the pop-up.
4.2.7.7 Performance Mode Button
The Performance Mode buttons are at the bottom on either side of the display, marked with
left and right arrows.
Left Performance Mode Button
►
To cycle through the parameters you can control with the Performance Controls (FILTER,
PITCH, FX SEND), press one of the buttons repeatedly.
4.2.8 Performance Controls
Underneath the display, the Deck features four encoders and buttons which control either FIL-
TER, PITCH or FX SEND per Slot in a Remix Deck, depending on the selected Performance mode.
Hardware Reference
The Deck
TRAKTOR KONTROL D2 - Manual - 138
To Next Page
