Traktor KONTROL D2 - Browsing Using Touch Interactions; Preview Tracks

►
Press the VIEW button. The display will return to Track view.
2.1.2 Browsing using Touch Interactions
In addition to regular interactions with D2, you can perform touch interactions. However, to
use touch interactions when browsing, the touch sensitivity for the BROWSE encoder has to be
enabled:
1. Open the TRAKTOR Preferences.
2. Select the tab TRAKTOR KONTROL D2.
3. Enable the Touch Control Auto Open Browser on Touch.
→
The touch sensitivity is now enabled on the BROWSE encoder.
With touch sensitivity enabled the following touch interactions can be performed:
To open the Browser:
►
Touch the BROWSE encoder. The Browser will be displayed in the respective display.
To exit the Browser:
►
Release the BROWSE encoder or stop interacting in the Browser. The display will return
to Track view.
2.1.3 Preview Tracks
In the Browser of the TRAKTOR KONTROL D2 it is possible to preview tracks directly. The pre-
view will be audible in TRAKTOR's Output Review channel routing to an output channel on
your audio interface that is connected to your mixer.
For more information on how to route audio channels with TRAKTOR, refer to chapter 14.3
Output Routing in the TRAKTOR Manual.
To preview a selected track:
Using Your D2—Getting Started
Using the Browser
TRAKTOR KONTROL D2 - Manual - 18