REMIX Mode
In Remix mode, the pads trigger the content of corresponding Remix Cells - the tracks, loops
or Samples defined in the Remix Set. After loading a Remix Set, the pads take on the Sample
Cells' color. By pressing Display buttons 3 and 4 you can scroll through the rows of Remix
Cells in steps of two.
4.2.11 Touch Strip
D2 doesn't feature the conventional Jog Wheel of a regular DJ controller. Functions usually as-
sociated with Jog Wheels are instead controlled by the intuitive Touch Strip.
Utilizing the Touch Strip, you can:
• Seek/navigate: within the track.
• Tempo bend (nudge) for aligning beats.
• Create a scratch effect
• Holding the track or Samples.
• Backspinning the track or the Samples.
Above the Touch Strip, a number of LEDs provide visual feedback for the actions taken on the
touch strip.
Phase Meter
For Track- and Remix Decks, the LEDs work as a Beat Phase Meter, showing the focused Deck's
beat phase offset from the MASTER Deck. This is the same meter as displayed in TRAKTOR's
Deck.
Direction of Scratching
If you didn't learn scratching with LPs and turntables, you may find inversing the Touch Strip's
direction more intuitive. If you select this option, swiping to the right on the Touch Strip will
move forward in the track's waveform.
►
Inverse the directional response by unchecking the Invert checkbox in TRAKTOR's D2
preferences: Preferences>Traktor Kontrol D2>Touchstrip>Scratch Sensitivity.
Hardware Reference
The Deck
TRAKTOR KONTROL D2 - Manual - 142
To Next Page
Loading...
