105
20. Appendix
20.2.8 Log Server
Problem Action
The Log Server program does not run. The Log Server requires the Microsoft Jet OLEDB 4.0 driver in order to access the database. This
driver is automatically installed with Windows ME, 2000 and XP. For Windows 98 or NT, go to the
Microsoft download site:
http://www.microsoft.com/data/download.htm to retrieve the driver file: MDAC 2.7 RTM Refresh
(2.70.9001.0).
Since this driver is used in Windows Office Suite, an alternate method of obtaining it is to install
Windows Office Suite. Once the driver file or Suite has been installed, the Log Server will run.
20.2.9 Sun Systems
Problem Action
Video display problems with HD15
interface systems (e.g. Sun Blade
1000 servers).*
• The display resolution should be set to 1024 x 768 @ 60 Hz:
Under Text Mode, go to OK mode and issue the following command:
setenv output-device screen:r1024x768x60 reset-all
Under XWindow:
1. Open a console and issue the following command:
m64config -res 1024x768x60
2. Log out
3. Log in
Video display problems with 13W3
interface systems (e.g. Sun Ultra
servers).*
• The display resolution should be set to 1024 x 768 @ 60 Hz:
Under Text Mode, go to OK mode and issue the following command:
setenv output-device screen:r1024x768x60 reset-all
Under XWindow:
1. Open a console and issue the following command:
m64config -res 1024x768x60
2. Log out
3. Log in
The local and remote mouse pointers
do not sync.
See Manual Sync Mode section in 18.1 Control Panel for more information.
* These solutions work for most common Sun VGA cards. If using them fails to resolve the problem, consult the Sun VGA card’s manual.
To Next Page
Loading...
Need help?
General
