Trotec SP3000 User Manual

www.troteclaser.com
Technical Datasheet
1
SP3000
Laser Cutting System
Mechanics
Working area
2.210 x 3.210 mm (87 x 126 in)
Loading area
2.500 x ∞ mm (98 x ∞ in)
Max. height of work piece
50 mm (1.96 in)
Working head
Software controlled z-axis
Working table
Slat cutting table, aluminum cutting grid table, acrylic cutting grid table
or honeycomb cutting table
Max. processing speed
1 m/s (40 ips) (standard); 2 m/s (79 ips) (optional)
Acceleration
10 m/s² (393 ips²)*
Motors
Brushless DC servo motors
Encoder
Incremental measuring system
Optical elements
Telescope, lens and all mirrors air-flushed protected from soiling
Lens
2.5" (standard); 3.75“, 5.0" (optional)
Accuracy
+/- 0,1 mm (0.004 in), over the whole working area
Addressable accuracy
0,001 mm (0.00004 in)
Accuracy to size of parts
According to material and process
Maximum material load
200 kg (440 lbs), load over the whole working area
InPack Technology
TM
Protects working head and all moving parts from dust; harsh environ-
ment protection kit included
Exhaust
Table exhaust for entire working area
Gas-Kit
Control of compressed air and process gas with max. 6 bar (87 psi),
built in filter-unit (free of mechanical dust, water and oil, max. flow rate
240 l/min, max. input 10 bar (145 psi), hose diameter 6 mm (0.23 in))
Software
JobControl
®
Expert
Interface
USB, RS-232 / ASCII, HPGL, AD-Logic System
Operating console
Keypad, safety-switch, system turnkey; workspace for mouse, key-
board, monitor, drawer for tools; PC and Monitor not included
* Depending on configuration
Laser
Laser system
Sealed-off CO
2
laser
Laser power
60, 100, 200 and 400 watts
Cooling
Water cooled
Wavelength
10,6 µm

Trotec SP3000 Specifications

General

Brand	Trotec
Model	SP3000
Category	Tools
Language	English