Trotec SP3000 - Page 36

Safety
Testing of the following emergency stop buttons:
Sensor area
Sensors
Illustration Interrupt / release
a) Operating console
•
Trigger emergency stop button.
•
Actuator must engage in the tripping
position!
•
Unlock the emergency stop button
again.
b) Machine (4 in total)
•
Trigger emergency stop button.
•
Actuator must engage in the tripping
position!
•
Unlock the emergency stop button
again.
•
Repeat this procedure for all 4
emergency stop buttons of the
machine!
c) Conyeyer (option)
•
Trigger emergency stop button.
•
Actuator must engage in the tripping
position!
•
Unlock the emergency stop button
again.
36 ENGLISH (Translation)