Trotec SP3000 - User Manual

Other manuals for Trotec SP3000

Questions and Answers

C
cbrownSep 6, 2025
Why are cut lines missing when using Trotec SP3000 Tools?
- S
  Scott AtkinsonSep 7, 2025
  If you are experiencing missing cut lines with your Trotec Tools, consider the following: * There may be zero passes in the material database. To solve this, increase the amount of passes in the JobControl® material database. * The line thickness in Corel Draw may be too big. If so, reduce line thickness to the smallest possible value. * The color may have been skipped in JobControl®. To solve this, set color to cutting in the JobControl® database.
C
Christopher FisherAug 22, 2025
What to do if the Trotec Laser Level size to be engraved or cut does not match the size in CorelDraw?
- B
  Bradley BakerAug 22, 2025
  If the size to be engraved or cut does not match the size in CorelDraw, it might be due to several reasons: * Raster correction is ON in JobControl®. Switch off raster correction in JobControl® (settings/advanced options/laser tab). * Wrong size settings in the printer driver. Use the same size as in CorelDraw. * Wrong image position is selected in the layout tab (printing). Switch the layout settings to: as in document. * Wrong machine is selected in the JobControl®. Select the proper machine in JobControl®.
F
fyoungSep 4, 2025
Why does the engraved or cut size not match the size in Corel Draw with Trotec SP3000?
- J
  Jocelyn WongSep 4, 2025
  If the engraved or cut size doesn't match the size in Corel Draw with your Trotec Tools, there might be several reasons: * Raster correction might be enabled in JobControl®. To solve this, switch off raster correction in JobControl® (settings/advanced options/laser tab). * There might be wrong size settings in the printer driver. If so, use the same size as in Corel draw. * The wrong image position might be selected in the layout tab (printing). To solve this, switch the layout settings to: as in document. * The wrong machine might be selected in the JobControl®. To solve this, select the proper machine in JobControl®.
C
Christine KochSep 2, 2025
Why are fine details on stamps engraved too thinly on my Trotec Laser Level?
- N
  Nancy ClarkSep 2, 2025
  If fine details on stamps are engraved too thinly, it is due to too steep shoulders. Choose another shoulder or edit (flat/medium/steep): Options/ Process Options/Stamp.
K
Kyle PerezSep 1, 2025
What to do if Trotec Laser Level has no referencing after commissioning?
- C
  Colin KingSep 1, 2025
  If there is no referencing after commissioning, it might be because the top, front, or side door is not closed. Close the doors.
M
Mr. Austin WallerAug 30, 2025
Why does my Trotec Laser Level have waviness of the lines?
- G
  gkentAug 30, 2025
  Waviness of the lines can be caused by a loose lens. Check the lens and lens holder.
M
Michael JohnsonAug 29, 2025
How to fix blurred edges on Trotec Laser Level?
- W
  william27Aug 29, 2025
  Blurred edges can be caused by imprecise focusing. Check the focus.
J
Jacqueline ReeseAug 27, 2025
Why are corners and angles not cut or marked with my Trotec Laser Level?
- B
  brian35Aug 27, 2025
  If corners and angles are not being cut or marked, the power might be too low. Increase the correction in JobControl® (Settings / Material Templates Setup - Correction).
N
ncannonAug 27, 2025
How to fix too low engraving depth on Trotec Laser Level?
- C
  Carl MurphyAug 27, 2025
  If the engraving depth is too low, it could be caused by: * Imprecise focusing. Check focus. * Dirty optics. Clean optics.
U
usmithAug 25, 2025
Why is my Trotec Laser Level missing the cutting line?
- J
  juancoleAug 26, 2025
  A missing cutting line may be due to: * Zero passes in material database. Increase the amount of passes in the JobControl® material database. * Line thickness in CorelDraw too big. Reduce line thickness to the smallest possible value. * Color was skipped in JobControl®. Set color to cutting in the JobControl® database.

Trotec SP3000 Specifications

General

Brand	Trotec
Model	SP3000
Category	Tools
Language	English

Summary

General Information

Information about this manual

Details on how to use and understand the manual for safe operation.

Explanation of symbols

Defines symbols used for safety notes, warnings, and information.

Liability and warranty

Outlines manufacturer's liability and warranty terms for the equipment.

Scope of delivery (standard configuration)

Lists all items included in the standard package of the laser machine.

Type plate

Information on the machine's identification plate and its importance.

Safety

Safety principles

Fundamental safety guidelines for operating the machine safely and preventing hazards.

Laser safety

Specific safety measures and classifications related to laser radiation hazards.

Area of responsibility

Defines the responsibilities of operators and personnel for machine safety.

Operating and service personnel requirements

Specifies qualifications and training needed for personnel operating or servicing the machine.

Machine identification (warning and safety stickers)

Details on warning and safety labels placed on the machine for hazard awareness.

Safety devices

Describes the various safety features and their functions on the machine.

Tests to be carried out

Procedures for regularly testing safety-relevant components to ensure functionality.

In case of emergency

Instructions for actions to take during emergencies or accidents.

Secondary (indirect) hazards

Information on hazards like fire, gases, fumes, and reflections.

Technical Data

Exhaust system requirements

Specifications and recommendations for exhaust systems compatible with the machine.

Materials

Lists materials suitable for cutting and engraving with CO2 laser, and prohibited materials.

Machine overview

General overview

Provides a visual identification of the machine's main components and parts.

Tables (multifunctional table concept)

Details different types of cutting tables and their applications.

Lens(es)

Information on available lens options for the laser system.

Nozzles

Description of available nozzle sizes and types for the laser head.

Transport

Safety notes

Crucial safety guidelines to prevent injury and damage during machine transport.

Delivery state

Information on how the machine is delivered and packaging.

Temperature and humidity

Recommended environmental conditions for transport and storage.

Required tools for unloading and transport

Lists necessary tools for handling and moving the machine parts.

Relocation of the machine

Step-by-step instructions for moving the machine to a new location.

Setup and installation

Safety notes

Safety precautions to observe during machine assembly and installation.

Operating environment

Specifies the required subsoil and environmental conditions for installation.

Connections

Details on connecting the machine to power, exhaust, and cooling systems.

Operation

Before commissioning

Essential checks and preparations before starting the machine for the first time.

Software

Information on using the accompanying software for machine control.

Power On;Off

Procedure for safely turning the machine on and off.

Lense placement

Step-by-step guide for installing and removing the laser lens.

Table placement

Instructions for placing and securing the working tables within the machine.

Focusing methods

Explanation of different methods for achieving optimal focus for laser processing.

Focus tool

Detailed steps for using the manual focus tool.

Sonar Technology

Information on the Sonar Technology™ autofocus system.

Software: Safety analysis

Procedure for performing safety analysis using the machine's software.

Control panel

Overview of the machine's main control interface and its components.

Keypad

Detailed description of the buttons and indicators on the control keypad.

Description

Explains the function of each button and status indicator on the keypad.

Shortcuts

List of key combinations for faster operation and access to functions.

Maintenance

Safety notes

Critical safety instructions to follow during all maintenance procedures.

Maintenance schedule

Defines the recommended daily, weekly, and monthly maintenance tasks.

Cleaning

Procedures for cleaning the machine's components to ensure optimal performance.

Machine

General steps for cleaning the interior and exterior of the laser machine.

Optics in general

Guidelines for cleaning critical optical components like lenses and mirrors.

Lens

Detailed instructions for cleaning and inspecting the laser lens.

Cleaning the nozzle

Procedure for cleaning the laser nozzle.

Cleaning the laser head exhaust

Steps for cleaning the exhaust system connected to the laser head.

Cleaning the vent slots of the table exhaust

Instructions for cleaning the exhaust vents on the machine's table.

Ultrasonic sensor (Option Sonar Technology)

Method for cleaning the ultrasonic sensor used for focusing.

Cleaning the protective glass 2,5 inch

Procedure for cleaning the protective glass for the 2.5-inch lens holder.

Cleaning the protective glass 5,0 inch

Procedure for cleaning the protective glass for the 5.0-inch lens holder.

Troubleshooting

Error, cause and remedy

A guide to common problems, their potential causes, and solutions.

Contact details

Technical Support

Contact information and procedures for obtaining technical assistance.

Local Offices; Sales

Information on finding local sales offices and representatives.

Technical Documentation

Details for providing feedback or suggesting changes to the manual.

Disassembly

Disposal

Appendix

Related product manuals

Trotec SP3000 - User Manual

Table of Contents

Other manuals for Trotec SP3000

Questions and Answers

Trotec SP3000 Specifications

Summary

General Information

Information about this manual

Explanation of symbols

Liability and warranty

Scope of delivery (standard configuration)

Type plate

Safety

Safety principles

Laser safety

Area of responsibility

Operating and service personnel requirements

Machine identification (warning and safety stickers)

Safety devices

Tests to be carried out

In case of emergency

Secondary (indirect) hazards

Technical Data

Exhaust system requirements

Materials

Machine overview

General overview

Tables (multifunctional table concept)

Lens(es)

Nozzles

Transport

Safety notes

Delivery state

Temperature and humidity

Required tools for unloading and transport

Relocation of the machine

Setup and installation

Safety notes

Operating environment

Connections

Operation

Before commissioning

Software

Power On;Off

Lense placement

Table placement

Focusing methods

Focus tool

Sonar Technology

Software: Safety analysis

Control panel

Control panel

Keypad

Description

Shortcuts

Maintenance

Safety notes

Maintenance schedule

Cleaning

Machine

Optics in general

Lens

Cleaning the nozzle

Cleaning the laser head exhaust

Cleaning the vent slots of the table exhaust

Ultrasonic sensor (Option Sonar Technology)

Cleaning the protective glass 2,5 inch

Cleaning the protective glass 5,0 inch

Troubleshooting

Error, cause and remedy

Contact details

Technical Support

Local Offices; Sales

Technical Documentation

Disassembly

Disposal

Appendix

Related product manuals