Trox Technik FKR-EU - Mortar-Based Installation

5.6.2 Mortar-based installation
Mortar-based installation into a lightweight partition wall, compartment wall or safety partition wall
Fig. 35: Mortar-based installation into a lightweight partition wall, compartment wall or safety partition wall
1 FKR-EU
2.1 Mortar
3.2 Lightweight partition wall with metal support
structure, cladding on both sides
3.6 Compartment wall or safety wall with metal sup-
port structure, cladding on both sides
4.1 Solid ceiling slab
6.5 Mineral wool (depending on wall construction)
6.11 Insulating strip (depending on wall construction)
7.5 Steel support structure (box section)
7.13 Cladding
7.23 Sheet steel insert depending on wall manufac-
turer
9.2 Extension piece or duct
Z Spigot construction 370 mm
Flange construction 342 mm
*
Installation near the floor analogous to
# optional
–
Up to EI 90 S
Installation
Lightweight partition walls > Mortar-based installation
Fire damper FKR-EU54