Troxler 4640-B - Printing (Uploading) Project Data

PRINTING (UPLOADING) PROJECT DATA
To print (upload) project data from the gauge to the computer:
1. From the Terminal window toolbar, select T
ransfers, then
select R
eceive Text File from the dropdown menu.
2. From the Receive Text File window, select the directory in
which the project data is to be stored, then enter a filename in
the N
ame box. Troxler recommends naming the file with a .txt
extension. Click OK to return to the Terminal window.
3. On the 4640-B gauge, select the project data to be printed
(downloaded) to the computer, and follow the instructions in
Chapter 4 to print the data to the computer. The project data will
be displayed in the Terminal window as it is uploaded.
4. When the data transmission is complete, select T
ransfer from
the Terminal window toolbar. Then select S
top from the
dropdown menu.
Appendix F–6