CREATING A PROJECT
The Project function allows the user to create, retrieve, view, and/or
erase projects. Data is stored in the 4640-B under a project number.
If the user presses the 〈STORE〉 key after a reading is taken (see
page 4–3), the reading will be stored in the gauge memory under the
active project number.
Press 〈SHIFT〉 and 〈PROJECT〉 for the display:
Current Project:
xxxxxxx
Do you want a
new Project #?
From this screen projects can be created (press 〈YES〉) or viewed
and/or erased (press 〈NO/CE〉).
CREATE A NEW PROJECT
Input the number of a new project. The project will be active until a
new project number is entered. All gauge readings that are stored
will be stored under the new project.
VIEW/ERASE PROJECT
PR# xxxxx
1- View Proj.
2- Erase Proj.
3- Next Proj.
Scroll through the project numbers by pressing 〈3〉. When the
desired project number is displayed, the user may either view the
project data (press 〈1〉) or erase the project from the gauge memory
(press 〈2〉.). After making the selection to either view or erase,
follow all instructions on the gauge display.
4–2
To Next Page
Loading...
