RECOVER ERASE
If project data is inadvertently erased, the Recover Erase function
may
recover the lost information.
NOTE
There is no guarantee that the Recover Erase function
will successfully recover the lost data. If any
data has
been stored after the accidental erasure, a successful
recovery is impossible.
To use the Recover Erase function, press 〈SHIFT〉 and 〈SPECIAL〉.
Press 〈2〉. If the recovery is successful, the display will be:
Project Number:
xxxxx
Data Recovered!
If the recovery is not
successful, the display is:
NO DATA
RECOVERED!
6–4
To Next Page
Loading...
