Troxler 4640-B - Print;Baud Setup

PRINT/BAUD SETUP
The Print/Baud Setup function allows the user to configure the
gauge for communication with an RS-232 serial device such as a
printer or computer.
The baud rate or communication speed should be set to match the
peripheral device. Refer to the device owner's manual for the proper
settings. The Print/Baud Setup function also provides a line feed
option to automatically transmit a line feed with each carriage
return.
Press 〈SHIFT〉 and 〈SPECIAL〉. Either press 〈YES〉 two times then
〈START/ENTER〉, or press 〈6〉 for the display:
Print/Baud Setup
Select:
1- Baud Rate
2-Auto Line Feed
To access the baud rate selection menu, press 〈1〉. To activate the
automatic line feed feature, press 〈2〉.
Baud rate: xxxx
Do you want
to change?
To change the baud rate, press 〈YES〉.
Baud rate: xxxx
1- 300, 3- 1200
2- 600, 4- 2400
(CE to abort)
Choose the appropriate baud rate with the numeric keys. The gauge
returns to the Ready mode.
6–10