PRINTING MEASUREMENT DATA
The measurement data from one project or from all projects may be
printed (uploaded) to a computer file if the gauge control unit is
connected to the serial port. Appendix F provides instructions on
using the HyperTerminal program in Microsoft Windows 95
and Windows 98 or the Terminal program in Windows 3.1 to
print (upload) data to a computer. The optional Procomm Plus
data processing package available from Troxler may also be used to
print (upload) data.
Press 〈SHIFT〉 and 〈PRINT〉. The display will be:
Connect serial
device & Select:
1- one Project
2- all Projects
Connect the printer to the RS-232 serial port located on the front of
the gauge (see Figure 4–1). See page 6–10 for information on the
serial port parameters.
To print a single project, press 〈1〉. To print all
projects, press 〈2〉.
If printing all files the gauge will return to the Ready mode upon
completion.
Figure 4–1. Gauge Connections
4–4
To Next Page
Loading...
