Troxler 4640-B - Averaging Measurements

AVERAGE
5. SHIFT FUNCTIONS
The Average function provides a method of averaging from two to
twelve readings. This technique is especially useful if taking
measurements around a core or core site.
When the gauge is in the average mode, the display will
automatically prompt the user to take the required measurements.
Press 〈SHIFT〉 and 〈AVERAGE〉 for the display:
No. of readings
to average: xx
Do you want
to change ?
Press 〈YES〉 and input the number of readings to be averaged.
When the next measurement is taken, the display will reflect that the
current reading is one of a total number of readings to be averaged.
Reading# x of xx
Thick: x.xx
Avg: xxxx
Time: xxx
To continue taking readings, press 〈START/ENTER〉.
When all the readings are complete, the average result will be
displayed.
Model 4640-B 5–3