Press either 〈YES〉 three times then 〈START/ENTER〉, or press
〈10〉 for the display:
SPECIAL FUNCTION
Set Time/Date
Enter code ----
and Press ENTER
The Time/Date function is a restricted function and requires an
access code for operation. This is to ensure that unauthorized
personnel do not change the time and date.
Input the access code (see page xi) and press 〈START/ENTER〉.
The display will be:
Date: mm/dd/yy
Do you want to
change Date?
Press 〈YES〉. Select the format to be used: dd/mm/yy or mm/dd/yy.
Input the new date and press 〈START/ENTER〉.
Repeat the above procedure to change the time.
CHANGE CUSTOMER NAME
The gauge may be programmed to display your name or any other
message (not to exceed 16 characters) during the powerup/self-test
stage.
Press 〈SHIFT〉 and 〈SPECIAL〉.
3–6
To Next Page
Loading...
