ERASING A PROJECT
The Erase function allows project data to be erased or removed
from gauge memory.
Press 〈SHIFT〉 and 〈ERASE〉. The display will be:
Select to ERASE:
1- one Project
2- all Projects
To erase a single project, press 〈1〉.
To erase all projects stored in the gauge, press 〈2〉.
NOTE
In the event that project data is inadvertently erased,
the Recover Erase feature may recover lost data. See
page 6–4 for information on using the Recover Erasure
feature.
4–6
To Next Page
Loading...
