GAUGE PARAMETER SETUP
After unpacking and turning the gauge on, several parameters can
be initialized. These parameters do not usually require changing and
may include the measurement units, count time, company name, and
time/date.
SELECTING UNITS
The 4640-B allows measurement results to be displayed in either
metric or U.S. units. To select the unit type, press 〈SHIFT〉 and
〈SPECIAL〉. The display will be:
SPECIAL FUNCTION
YES - next menu
1- Surface Voids
2- Recover Erase
Press 〈YES〉 twice then 〈START/ENTER〉, or press 〈7〉 for the
display:
Units in US
Select 1- US
2- METRIC
ENTER- no change
To select the required units, press either 〈1〉 or 〈2〉.
3–4
To Next Page
Loading...
