TSC TDP-247 Service Manual

60 pages

To Next Page

To Previous Page

3.9. Replacing Feed Button and Feed Button PCB

1. Please refer to 3.1 for disassembling the top cover and top inner cover.

2. Remove the feed button from top cover.

3. Disconnect the JP28 hardness from the PCB

4. Remove 2 screws from the top inner cover and replace the feed button PCB.

5. Reassemble parts in reverse procedures.

Feed Button

Top Cover

Top Inner Cover

Feed Button PCB

Screw

Other manuals for TSC TDP-247

Need help?

Do you have a question about the TSC TDP-247 and is the answer not in the manual?

General

Print Method	Thermal Transfer / Direct Thermal
Communication Interface	USB 2.0, RS-232
Power Supply	100-240V AC, 50/60 Hz
Operating Temperature	41°F - 104°F (5°C - 40°C)
Operating Humidity	85% non-condensing
Max. Print Width	4.09" (104 mm)
Label Width	1.18" - 4.33" (30 mm - 110 mm)
Storage Temperature	-40 ~ 60°C (-40 ~ 140°F)