TSC TDP-247 Service Manual

60 pages

To Next Page

To Previous Page

3.11. Peel-Off Installation (Option) Assembly

1. Open the top cover.

2. Remove two screws in lower cover for hinge holder.

3. Remove 6 screws on the lower inner cover.

4. Turn the printer upside down.

Screws

Insert the

screw of

hinge holder

here

Insert the

screw of

hinge holder

here

Other manuals for TSC TDP-247

Need help?

Do you have a question about the TSC TDP-247 and is the answer not in the manual?

General

Print Method	Thermal Transfer / Direct Thermal
Communication Interface	USB 2.0, RS-232
Power Supply	100-240V AC, 50/60 Hz
Operating Temperature	41°F - 104°F (5°C - 40°C)
Operating Humidity	85% non-condensing
Max. Print Width	4.09" (104 mm)
Label Width	1.18" - 4.33" (30 mm - 110 mm)
Storage Temperature	-40 ~ 60°C (-40 ~ 140°F)