8
3 Operation
Amendment 10
11 May 2015
Temperature Display -
Shows pre-set chamber temperature.
When used with the ‘Temp’ key, display shows
actual oven temperature for 5 seconds.
Shows cooking programs and error codes.
‘Steam’ Key and LED -
Used to set automated steam level or to
provide a manual steam injection when
in Manual Steam Mode.
LED is ‘On’ when automatic moisture injection is
set or when steam is manually injected.
Temperature Adjustment Control
Time Display -
Shows cook time in full minutes only
from 180 - 10, and in minutes and seconds for
the final 10 minutes.
NOTE:
In Core Temp Mode, time display alternates
between ‘CP’ and set core probe temperature.
‘On/Off’ Key and LED -
A dual-function key:
Press ‘On/Off’ key once to turn oven ‘On’.
Press and hold ‘On/Off’ key for
1.5 seconds to turn the oven ‘Off’.
Time Adjustment Control
NOTE: In Core Temp Mode, ‘Timer’ knob is
used to set core probe temperature.
‘Program’ Key and LED -
Used to select cooking programs, and to
set program parameters.
‘Temp’ Key and LED -
Displays actual oven temperature for
5 seconds on Temperature Display. LED
‘On’ when heating element is on
(heating indicator).
LED flashes when Upper Display is showing
actual temperature.
NOTE:
In Core Temp Mode, this key is used to
display Actual Oven Temperature (Upper
Display) and Core Probe Temperature (Lower
Display).
‘Light’ Key and LED -
Switches oven lights ‘On/Off’. LED is
‘On’ when oven lights are ‘On’.
‘Timer-Start/Stop’ Key & LED -
The ‘Timer-Start/Stop’ key is used to
control the following functions:-
Cancelling Alarm (All Modes).
Starting Core Temp Mode (Core Temp
Mode).
Starting Timer (Manual Mode).
Re-setting Timer (Manual Mode).
Starting Program (Program Mode).
Cancelling and Re-setting Program
(Pr
ogram Mode).
Core Probe Connection Point
Oven Control Panel (From Ser. No. 762120)
To Next Page
Loading...
