turck TBEN-S Series User Manual

Parameterizing and Configuring
Configuring the devices at EtherNet/IP
120
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
n Configuration Assembly – TBEN-S2-4AO
Byte no. Bit no.
Dec. Hex. 7 6 5 4 3 2 1 0
Device Configuration Data [}112]
0…9 0x00…
0x09
- Eth2 Port-
Setup
Eth1 Port-
Setup
Quick
Connect
Parameter data [}39]
Channel 0
10 0x0A - - - - Operation mode
11 0x0B - - - - Current range
12 0x0C - - - - - - Data representation
13 0x0D - - - - Voltage range
14 0x0E - - - - - - - Deactiv.
ch.
15 0x0F - - - - - - - Output
recovery
mode
16 0x10 - - - - - - - Deactivate
diagn.
17 0x11 - - - - - - Output on
fieldbus error
18 0x12 Substitute value (SVAL)
19 0x13
Channel 1
20…29 0x14…
0x1D
Assignment similar to channel 0 (byte 10…19)
Channel 2
30…39 0x1E…
0x27
Assignment similar to channel 0 (byte 10…19)
Channel 3
40…49 0x28…
0x31
Assignment similar to channel 0 (byte 10…19)
Channel
50…52 0x32…
0x33
reserved

turck TBEN-S Series Specifications

General

Brand	turck
Model	TBEN-S Series
Category	Control Unit
Language	English