Tuttnauer ELV-D - Page 44

Page 42 of 83 Pages
6.4.4 Cooling
6.4.4.1 Cool Mode
Choose and enter Cool Mode
SET PARAMETER
screen will be displayed
Set the required value, move to
Set and press UP or
DOWN keys to confirm the parameter value.
In order to exit move the cursor to
Exit and press UP
or DOWN keys
6.4.4.2 Cool End Temperature
Repeat the action mention in 6.2.4.1 Cool Mode
6.4.4.3 Cool Exhaust Rate
Repeat the action mention in 6.2.4.1 Cool Mode
6.4.5 Exhaust
6.4.5.1 Exhaust Mode
Choose and enter Exhaust Mode
SET PARAMETER
screen will be displayed
Set the required value, move to
Set and press UP or
DOWN keys to confirm the parameter value.
In order to exit move the cursor to
Exit and press UP
or DOWN keys
Typical display for
Cool Mode
subdirectory
Typical display for
Exhaust Mode
subdirectory