Tuttnauer ELV-D - Page 45

Page 43 of 83 Pages
6.4.6 Dry
6.4.6.1 Dry Heat On 1
Choose and enter Dry Heat On 1
SET PARAMETER
screen will be displayed
Set the required value, move to
Set and press UP or
DOWN keys to confirm the parameter value.
In order to exit move the cursor to
Exit and press UP
or DOWN keys
6.4.6.2 Dry Heat Off 1
Repeat the action mention in 6.2.6.1 Dry Heat On 1
6.4.6.3 Dry first stage time
Repeat the action mention in 6.2.6.1 Dry Heat On 1
6.4.6.4 Dry Heat On 2
Repeat the action mention in 6.2.6.1 Dry Heat On 1
6.4.6.5 Dry Heat Off 2
Repeat the action mention in 6.2.6.1 Dry Heat On 1
Typical display for
Dry Heat On 1
subdirectory