Tuttnauer ELV-D - Page 46

Page 44 of 83 Pages
6.4.7 End
6.4.7.1 End Temperature
Choose and enter End Temperature
SET PARAMETER
screen will be displayed
Set the required value, move to
Set and press UP or
DOWN keys to confirm the parameter value.
In order to exit move the cursor to
Exit and press UP
or DOWN keys
6.4.7.2 Multiple Cycles
Repeat the action mention in 6.2.7.1 End Temperature
6.4.7.3 Multiple Cycles Gap
Repeat the action mention in 6.2.7.1 End Temperature
Typical display for
End
Temperature
subdirectory