LABEL AND IDENTIFICATION PLATE
Label and identification plate required or contemplated by federal regu-
lation and their location are listed in the following table. These labels are
reproduced on pages A5 through A6.
1. Vehicle Identification Number (VIN) Plate
<Vehicle Identification Number (VIN) Structure>
A5
LABEL NAME
1. VEHICLE IDENTIFICATION
NUMBER PLATE
(Required by 49 CFR §565)
2. VEHICLE NOISE EMISSION
CONTROL INFORMATION
LABEL
(Required by 40 CFR §205.55-
11)
3. VEHICLE EMISSION COTROL
INFORMATION LABEL
(Required by 40 CFR §86.084-
35)
4. CHASSIS-CAB MANUFAC-
TURER’S CERTIFICATION
LABEL
(Requirement of 49 CFR
§567.5)
LOCATION
On the upper portion of the
driver’s side rear corner panel
Upper middle part of cab back
inner panel
Top surface of engine rocker-
cover
On the upper portion of the
driver’s side cab back inner panel
To Next Page
Loading...