UD Trucks UD2000 - Frame Height Calculation; If Hr Is Greater than Hf; If Hf Is Greater than Hr

FRAME HEIGHT CALCULATION
NOTE : FOR EMPTY CONDITION, USE EMPTY VALUES FOR LOADED
CONDITION, USE LOADED VALUES
WB ; WHEELBASE, CENTER LINE OF FRONT WHEELS TO CENTER
LINE OF REAR WHEELS
FO ; FRONT OVERHANG, CENTER LINE OF FRONT WHEELS FOR-
WARD TO END OF FRAME
RO ; REAR OVERHANG, CENTER LINE OF REAR WHEELS REAR-
WARD TO END OF FRAME
TR ; TIRE RADIUS (LOADED OR ANY OTHER SELECTED RADIUS)
HF ; HEIGHT-FRONT WHEELS, FRONT HEIGHT FROM TOP OF
FRAME TO GROUND
HR ; HEIGHT-REAR WHEELS, REAR HEIGHT FROM TOP OF FRAME
TO GROUND
FFH ; FRONT FRAME END HEIGHT, FRONT END OF FRAME HEIGHT
FROM TOP OF FRAME TO GROUND
FEH ; REAR FRAME END HEIGHT, REAR END OF FRAME HEIGHT
FROM TOP OF FRAME TO GROUND
IF HR IS GREATER THAN HF
FFH = HF – (
HR – HF
X FO )
WB
FEH = HR + (
HR – HF
X RO )
WB
IF HF IS GREATER THAN HR
FFH = HF + (
HF – HR
X FO )
WB
FEH = HR – (
HF– HR
X RO )
WB
C6