EasyManua.ls Logo

UD Trucks UD2000 - Emission Control Systems and Modifications

Default Icon
385 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Violation of federal regulation may result in the imposition of civil or crimi-
nal penalties.
EMISSION CONTROL SYSTEMS AND MODIFICA-
TIONS
All new Nissan Diesel Motor Co., Ltd. chassis-cabs and engines
installed in Nissan Diesel Motor Co., Ltd. chassis-cab comply with the
applicable Federal Vehicle Emission Control Regulations, and are certi
-
fied by the U.S. Environmental Protection Agency.
The Gaseous Emission Control Systems Warranty is provided in the
Warranty and Service Booklet. Maintenance information is provided in
the Nissan Diesel Motor Co., Ltd. Owner’s Manual. Both documents
must be incorporated in and furnished with each vehicle at the time of
sale to provide the user with important information.
Any modification to the emission control system by any other subse-
quent manufacturer in violation of applicable law is subject to penalty in
accordance with applicable law and regulations. Intermediate and final
stage manufacturers, and others must obtain approval of any modifica
-
tion, change, addition or deletion of components of the emission control
system from the Environmental Protection Agency before making any
such modification, change, addition or deletion of components. Subse
-
quent stage manufacturers should secure legal counsel for advice con-
cerning compliance with applicable regulations.
The parts and systems listed below do not require an individual certifi-
cation of emission control conformity based on federal law. However, all
have the possibility of influencing the conditions of granting the certifica
-
tion of conformity with emission control regulations.
• Engine assembly
• Engine cooling system
• Fuel system
• Air intake system (including Air Cleaner, Ducts, Hose, Clamps and
Valves)
• Crankcase emission control system (Air Control Valve and Lines)
• Exhaust Inlet and Outlet Pipes and Muffler
• And any other emission control system components
Do not change the back pressure of the exhaust manifold. Any change
to the exhaust inlet and outlet pipes or muffler must not result in an
increase in vehicle noise.
A4

Table of Contents

Related product manuals