A : GENERAL INFORMATION
INCOMPLETE VEHICLES-SUBSEQUENT MANU-
FACTURERS AND CERTIFICATION
Federal law, 49 CFR Part 567 and 568 provides requirements concern-
ing certification of compliance to FMVSS of vehicles manufactured in two
or more stages. These regulations require among other things that a label
certifying that each completed vehicle conforms with all applicable
FMVSS on the stated date of manufacture be permanently affixed to such
vehicle. Consult your legal counsel for advice concerning compliance
with the regulations and certification.
Nissan Diesel Motor Co., Ltd. furnishes a Document for Incomplete
Vehicle with all incomplete vehicles containing information required to be
furnished to subsequent stage manufacturers by federal regulation. The
Document for Incomplete Vehicle includes the identification of the particu
-
lar vehicle to which the manual applies, the designation by Nissan Diesel
Motor Co., Ltd. of the vehicle type into which the incomplete vehicle may
be manufactured, a listing of the applicable FMVSS and statements
regarding compliance of the vehicle with each standard at the time of
manufacture. In some cases, statements include conditions under which
the vehicle may be manufactured so as to conform when completed. A
subsequent stage manufacturer who deviates from these conditions must
independently provide the basis for certification to the particular standard.
The Document for Incomplete Vehicle must remain with the vehicle
until a label certifying compliance with FMVSS has been permanently
affixed to the completed vehicle by the final stage manufacturer.
Sample Document for Incomplete Vehicle
A1
To Next Page
Loading...