FEDERAL MOTOR VEHICLE SAFETY STANDARDS
AND REGULATIONS APPLICABLE TO TRUCKS
WITH A GVMR GREATER THAN 10,000 POUNDS
Here is a list of the U.S. Federal Motor Vehicle Safety Standards
(FMVSS), applicable to Incomplete Vehicles manufactured by Nissan Die
-
sel Motor Co., Ltd.
FMVSS
No. Description
101 CONTROLS & DISPLAYS
102 TRANSMISSION SHIFT LEVER SEQUENCE, STARTER
INTERLOCK AND TRANSMISSION BRAKING EFFECT
103 WINDSHIELD DEFROSTING AND DEFOGGING SYSTEMS
104 WINDSHIELD WIPING AND WASHING SYSTEMS
105 HYDRAULIC BRAKE SYSTEMS
106 BRAKE HOSES
108 LAMPS, REFLECTIVE DEVICES AND ASSOCIATED
EQUIPMENT
111 REARVIEW MIRRORS
113 HOOD LATCH SYSTEM
116 MOTOR VEHICLE HYDRAULIC BRAKE FLUID
120 TIRE SELECTION AND RIMS FOR MOTOR VEHICLES OTHER
THAN PASSENGER CARS
121 AIR BRAKE SYSTEMS
124 ACCELERATOR CONTROL SYSTEM
205 GLAZING MATERIALS
206 DOOR LOCKS AND DOOR RETENTION COMPONENTS
207 SEATING SYSTEMS
208 OCCUPANT CRASH PROTECTION
209 SEAT BELT ASSEMBLIES
210 SEAT BELT ASSEMBLY ANCHORAGES
213 CHILD SEATING SYSTEMS
302 FLAMMABILITY OF INTERIOR MATERIALS
OTHER APPLICABLE FEDERAL REGULATIONS
Part 574 TIRE IDENTIFICATION AND RECORD KEEPING
Part 577 DEFECT AND NON-COMPLIANCE NOTIFICATION
NOISE EMISSION CONTROL SYSTEMS AND
MODIFICATIONS
All new Nissan Diesel Motor Co., Ltd. vehicles sold in the U.S. are
manufactured in compliance with the U.S. Environmental Protection
Agency Federal Noise Emission Standards for Medium and Heavy trucks
in excess of 10,000 pounds GVMR (40 CFR §205.).
The Noise Emission Warranty is provided in the Warranty and Service
Booklet. The Nissan Diesel Motor Co., Ltd. Owner’s Manual includes
maintenance information for systems which may affect exterior noise
emissions. Both documents must be incorporated in and furnished with
each vehicle at the time of sale.
Federal law prohibits the following acts or the causing thereof:
A3
CONTROL SYSTEM
Air Intake System
Cooling System
Engine and Drive Line
System
Exhaust System
PROHIBITED ACTS
Removal or rendering the air cleaner, intake
duct or piping inoperative
Removal or rendering the fan clutch inopera-
tive. Removal of fan shrouds
Removal or rendering engine speed governor
inoperative so as to allow engine speed to
exceed manufacturer specifications
Removal or rendering the exhaust system
components, including muffler or piping inop-
erative