© 2008 NISSAN DIESEL MOTOR CO., LTD.
JAPAN
WARNING
Be sure any modification, alteration, or completion of this chassis-
cab includes required safety measures. This incomplete vehicle may be
built to many uses, and Nissan Diesel Motor Co., Ltd. cannot anticipate
all of them. Always consult safety regulations applying to the complete
vehicle, and conform exactly. Below are two types of safety adaptations
required under certain circumstances. Other measures may be required
depending on the type of body built on the chassis and the uses
expected for the final vehicle. Neglecting good safety measures could
cause a serious accident.
REAR IMPACT PROTECTION
Section 393.86 of the Federal Motor Carrier Safety Regulations
requires certain vehicles to be equipped with rear impact protection
guards. Such guards must be installed in accordance with the Federal
Motor Carrier Safety Regulations. Make sure you know whether the
vehicle requires a rear impact protection guard. If a guard is required,
make sure it meets or exceeds all applicable regulations and that it is
installed correctly. If the vehicle is to be operated outside the United
States, consult the regulations and standards applicable in the coun-
tries where the vehicle will be operated.
VISIBILITY DEVICES
Federal Motor Vehicle Safety Standards and Federal Motor Carrier
Safety Regulations require certain vehicles to be equipped with retrore-
flective sheeting or other devices to insure the vehicle is clearly visible.
Make sure that you apply visibility devices complying with the regula-
tions and take any other steps necessary to ensure that the vehicle is
sufficiently conspicuous at night or in low lighting conditions.
- 2 -
To Next Page
Loading...