Ulma ENKOFORM VMK - Joint between Panels (with no Filler)

ENKOFORM VMK
Construcción
32


ENKOFORM VMK
4.4. JOINT BETWEEN PANELS (WITH NO FILLER)
The component used to join two PANELS together
(with no filler between them) is the PANEL
CONNECTOR MK.
Joint between 2 PANELS by means of the PANEL CONNECTOR MK.
Main functions of the PANEL CONNECTOR MK:
 Bring the PANELS over and link them together
hermetically when positioning them in their right
place. It warranties the hermetic nature of the
joint.
 Correct possible assembling errors of the
PANELS.
Two PANELS joined by means of the PANEL CONNECTOR MK.