Ulma ENKOFORM VMK - Assembly, Use and Disassembly; 3.1. PROP: BASIC ASSEMBLY INSTRUCTIONS

ENKOFORM VMK
Construcción
19


ENKOFORM VMK
3. Assembly, Use and Disassembly
3.1. PROP: BASIC ASSEMBLY INSTRUCTIONS
The steps for assembling a standard PANEL are:
1 2
Protect the working area.
Prepare a flat surface and place the needed BIRA
trestles for each case.
3 4
Place VM 20 BEAMS as a base. Place the needed M
K
-120 WALERS.
Check the squaring.