Ultimaker S5 User Manual

2
Disclaimer
Please read and understand the contents of this installation and user manual carefully. Failure to read
the manual may lead to personal injury, inferior results or damage to the Ultimaker S5. Always make
sure that anyone who uses this 3D printer knows and understands the contents of the manual to make
the most out of the Ultimaker S5.
The conditions or methods used for assembling, handling, storage, use or disposal* of the device are beyond our
control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly
disclaim liability for loss, injuries, damage, or expense arising out of or in any way connected with the assembly,
handling, storage, use or disposal of the product.*
The information in this document was obtained from sources which we believe are reliable. However, the information is
provided without any warranty, express or implied, regarding its correctness.
Intended use Ultimaker S5
Ultimaker 3D printers are designed and built for fused filament fabrication with Ultimaker materials within a
commercial/business environment. The mixture of precision and speed makes Ultimaker 3D printers a perfect machine
for concept models, functional prototypes and small series production. Although we achieved a very high standard in
the reproduction of 3D models with the usage of Ultimaker Cura, the user remains responsible to qualify and validate
the application of the printed object for its intended use, especially critical for applications in strictly regulated areas
like medical devices and aeronautics. While being an open material platform, the best results will be achieved with
Ultimaker materials, while effort has been made to match material properties with machine settings.
* We comply to the WEEE-directive.
Copyright © 2018 Ultimaker. All rights reserved worldwide.
This language version of the manual is verified by the manufacturer (Original manual).
No part of this publication, including pictures may be reproduced and/or made public,
whether by printing, photocopying, microfilm or by any other means whatsoever,
without the prior written permission of Ultimaker.

Ultimaker S5 Specifications

General

Build Volume	330 x 240 x 300 mm
Layer Resolution	20 - 600 microns
Filament Diameter	2.85 mm
Max Nozzle Temperature	280 °C
Max Build Plate Temperature	140 °C
Print Technology	Fused Filament Fabrication (FFF)
Number of Print Heads	2
Build Plate	Heated glass build plate
Operating Sound	50 dBA
Print Speed	Up to 24 mm³/s
Display	4.7-inch color touchscreen
Operating Temperature	15 - 32 °C
Nozzle Diameter	0.25, 0.4, 0.6, 0.8 mm
Connectivity	Ethernet, Wi-Fi, USB
Supported Materials	PLA, ABS, Nylon, CPE, PVA, TPU 95A, PC, PP
Dimensions	495 x 585 x 780 mm
Feeder Type	Dual-geared
Print Head Movement Speed	300 mm/s
Build Plate Heating Time	Less than 4 minutes
Power Consumption	350 W
Travel Speed	300 mm/s
Operating Humidity	20 - 80% (non-condensing)