40
6.1 Update the rmware
Periodically, a new version of the Ultimaker S5 firmware is released. To ensure that your Ultimaker S5 is equipped with
the latest features it is recommended to update the firmware regularly. This can be performed on the Ultimaker S5 when
connected to a network, or by using a USB stick.
Update over the network
To update the firmware over the network, take the following steps:
1. Connect the printer to the network via Wi-Fi or Ethernet in the Network menu.
2. Go to Preferences g Maintenance g Update firmware.
3. Choose the Stable version.
The Ultimaker S5 will now download the latest firmware from the server and install it. This may take several minutes.
Update using a USB stick
Firmware can also be updated without an active network connection by taking the following the steps:
1. Download the latest firmware files from www.ultimaker.com/firmware.
2. Save the firmware files on a USB stick.
There is no need to extract the two firmware files from the archive after downloading. Simply place them in
the root directory of your USB stick.
3. Insert the USB stick in the USB port on the Ultimaker S5.
4. Go to Preferences g Maintenance g Update firmware.
5. The Ultimaker S5 will detect it if there are firmware files on the USB stick. If files are detected, you can select one to
start a firmware update.
To Next Page
Loading...
