Unify OpenScape CP400 - Door opener; Activating the Door opener; Opening the door without receiving a call

Other settings and functions 127
Door opener
Activating the Door opener
Prerequisite:Door opener has been enabled by your administrator.
At first you have to set up a programmable key to open a door.
See also at  page 68 that explains how to set up a local feature.
Hold down the Function key on the OpenScape Key Module 400 to which you
want to assign the door until the programming prompt is displayed.
or
@ If nec. Press Main Menu key.
Open using the softkey.
Select desired page (1 to 4).
Press and hold the Function key to which you want to assign the door.
€ Select "Assign local feature"
Confirm.
Confirm.
Confirm. The key is programmed.
Opening the door without receiving a call
Prerequisite:The functionality has to be enabled by your administrator.
When you have configured a programmable key to open the door, you can press
the relevant Softkey to open the door for your visitor without receiving a call from
the door phone.
Press the Function key on the OpenScape Key Module 400 to which the door
has been assigned.
or
@ If nec. press Main Menu key.
Open using the softkey.
Select desired page (1 to 4).
_
Favourites
_
Favourites (1/2)
Page 1
Q
_
_
Assign local feature
-
_
Door opener
-
_
Door opener 1
Q
_
Door opener 1
_
Favorites
_
Favorites (1/2)
Page 1
Q
_