Unify OpenScape CP400 - Setting headset port use

Setting up the phone 63
Setting headset port use
z You can also configure this setting via the Web interface  page 152 .
@ If nec. Press the Main Menu key.
Open using the softkey.
Open using the softkey.
if nec. j Enter and confirm the user password.
or
If the administrator has configured it, you can access the “Telephony settings”
option without being requested to enter a User password.
Open using the softkey.
Open using the softkey.
€ Select the headset port.
Open using the softkey
1
.
You are offered the following options:
• Wired headset
• Cordless headset
• Conference unit
Confirm with the softkey to switch.
Save the setting with the softkey.
Service/Settings
_
$
User:
-
_
$
Telephony settings
-
_
$
Audio
-
_
Settings
-
_
Headset port
K
_
1. The display shows the current setting
Wired headset
ä
_
Q
_