Unify OpenScape CP400 - Local phone settings; Audio settings; Volumes

Local phone settings 143
Local phone settings
Audio settings
Volumes
Set the volume here, for instance, for the loudspeaker, handset, or headset.
You can preset different volumes for the following microphones and signals in
ten levels:
• Loudspeaker
• Rufton
• Handset
• Headset
• Handsfree
• Rollover
• Warning tone
z You can also configure this setting via the Web interface  page 152.
@ If nec. Press the Main Menu key.
Open using the softkey
Open using the softkey.
if nec. j Enter and confirm the User password.
or
If the administrator has configured it, you can access the “Telephony settings”
option without being requested to enter a User password.
Open using the softkey.
Open using the softkey.
E.g. open the Rufton with the softkey
1
.
Use the softkey to increase the volume.
or
Use the softkey to decrease the volume
or
" Adjust using the toggle key
Confirm the setting with the softkey.
Save setting.
Service/Settings
_
$
User:
-
_
$
Telephony settings
-
_
$
Audio
-
_
Volumes
-
_
Rufton
K
_
1. The display shows the current setting
X
_
Œ
_
Q
_
Q
_