Fixing problems 157
Possible 2nd cause:
If "clear LED support" shows in menu:
You have tried to save a number without LED-display or an external number
using a key that already has an internal number with LED-display.
Possible response:
Confirm "clear LED support" to save the call number. The existing internal num-
ber remains on the other level without LED-display.
Pressed key does not respond:
Check if the key is stuck.
Phone doesn’t ring when called:
Check if your phone is on silent (silent icon appears on status screen
page 22). If so, turn off silent mode.
To correct any other problems:
Contact your administrator if a fault persists for more than 5 minutes, for examp-
le. Pass on the message displayed in the red field, if appropriate, as shown in
the next example. Problems that cannot be corrected should be referred to
Customer Service.
Contact partner in case of problems
Contact your administrator if a fault persists for more than 5 minutes,
for example.
Conversations
forwarding on
Tuesday 17 Nov. 2019
Service/Settings
No telephony (RF2)
To Next Page
Loading...
