Other settings and functions 119
Speaker call to a target destination
The system code for “Speaker call-one-way“ and the destination phone number
are programmed on a destination dial key page 80.
Press programmed dial key. It will immediately establish a connection with the
destination’s loudspeaker.
Speaker call in a group
Establishing a normal connection within a group or team (with team call= speed
dial number for team members 0-9 or 00-99) can also be done via speaker call.
Speaker call call is initiated by a group phone.
Speaker call to a variable destination
^ Lift the handset.
or
: Press the key and use speakerphone mode.
j System code for “Voice call group participants“ (ask relevant administrator if
necessary).
or
Press programmed key for “Call group participants“.
j Enter the speed dial code for the corresponding group member.
A connection to the target’s loudspeaker is established immediately, if
• not busy,
• the handset isn’t lifted,
• and do not disturb mode isn’t activated.
^ The recipient answers the speaker call by picking up the handset.
: When the receiver the loudspeaker key
or
presses the line key (if set-up), the connection is cancelled.
123456
_
The “Voice call group participants“ function is line-independent - anyone
can voice call anyone else.
Call group participants
_
123456
_
To Next Page
Loading...
